Power

+0.8 kW

at 7200 rpm

Torque

+1.1 Nm

at 5800 rpm

Weight

-2.3 kg

This sporty-looking exhaust is built using race-proven materials, with a handmade carbon-fibre outer sleeve, end cap, and muffler bracket, combined with a high-grade stainless-steel inner muffler structure and link pipe.

The hexagonal carbon-fibre muffler adds an individual touch to the look of the motorcycle and complements the deep and sporty sound that the exhaust emits.

Lightweight materials create a weight saving of 53.5% (2.3 kg) in comparison to the standard stock exhaust, and power and torque levels are increased by 0.8 kW (1.1 hp) at 7,200 rpm and 1.1 Nm at 5,800 rpm, respectively, when compared to a SV650X outfitted with a standard stock exhaust and tested on the Akrapovič in-house dyno.

This product is fully EURO5+ EC/ECE type approved, and the plug-and-play installation means no remapping is needed.

OTHER PRODUCTS

VIEW THE DATA

DOWNLOAD DOCUMENTS

Slip-On Line (Carbon) for Suzuki SV650X 2025

OTHER PRODUCTS FOR SUZUKI SV650X

Suzuki SV650X 2025

Slip-On Line (Titanium)

S-S7SO3-HRT

Suzuki SV650X 2025

Slip-On Line (Carbon)

S-S6SO9-HRC/1

VIEW THE DATA

	Unit	Akrapovič	Max gain
Max. power	kW	53 / 8700 rpm	+ 0.8 / 7200 rpm
	HP (m)	72.1 / 8700 rpm	+ 1.1 / 7200 rpm
	HP (i)	71.1 / 8700 rpm	+ 1.1 / 7200 rpm
Max. torque	Nm	62.6 / 8150 rpm	+ 1.1 / 5800 rpm
	lb-ft	46.2 / 8150 rpm	+ 0.8 / 5800 rpm
Weight	kg	1.99	- 2.3
	lb	4.4	- 5
	%		- 53.5
Inst. time	min	30

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

AUS Approval / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

RACING IS IN AKRAPOVIČ DNA

MOTORCYCLE RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.