S-CF10SO1-HFTT

Slip-On Line (Titanium) for

CFMOTO 800MT-X 2026

ECE

FIND A RESELLER IN YOUR COUNTRY

Power

+1.3 kW

at 5000 rpm

Torque

+1.8 Nm

at 4000 rpm

Weight

-2.4 kg

This exhaust has been constructed with lightweight titanium for the end cap, muffler bracket, and muffler outer sleeve, with stainless steel utilized for the link pipe and the inner structure of the muffler. The exhaust also features a carbon-fibre heatshield on the link pipe that offers protection for riders and gear.

Additional strength has been added to the surface of the muffler through a specially designed profile, which adds improved durability and a sporty look – as seen on rally-raid motorbikes. The exhaust produces a deep and sporty sound from the 946,2 cc engine. Performance gains of +1.3 kW (+1.7 hp) at 5,000 rpm in power and +1.8 Nm at 4,000 rpm in torque were recorded during testing on the Akrapovič in-house dyno when compared with the standard system.

The plug-and-play installation means no remapping is necessary. The exhaust is EC/ECE type approved and Euro 5+ compliant. It is compatible with stock panniers and finished with an Akrapovič logo sticker on the muffler.

OTHER PRODUCTS

VIEW THE DATA

DOWNLOAD DOCUMENTS

Slip-On Line (Titanium) for CFMOTO 800MT-X 2026

OTHER PRODUCTS FOR CFMOTO 800MT-X

Optional

CFMOTO 800MT-X 2026

Heat Shield (Carbon)

P-HSCF8SO1

VIEW THE DATA

	Unit	Akrapovič	Max gain
Max. power	kW	76.5 / 9400 rpm	+ 1.3 / 5000 rpm
	HP (m)	104.1 / 9400 rpm	+ 1.7 / 5000 rpm
	HP (i)	102.6 / 9400 rpm	+ 1.7 / 5000 rpm
Max. torque	Nm	91.3 / 6700 rpm	+ 1.8 / 4000 rpm
	lb-ft	67.3 / 6700 rpm	+ 1.3 / 4000 rpm
Weight	kg	2.7	- 2.4
	lb	6	- 5.3
	%		- 47.4
Inst. time	min	30

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

Performance graph / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

AUS Approval / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

RACING IS IN AKRAPOVIČ DNA

MOTORCYCLE RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.