S-K5SO2-HFTT

Slip-On Line (Titanium) for

Kawasaki KLE 500 2026

2026

ECE

EPA

FIND A RESELLER IN YOUR COUNTRY

Power

+0.6 kW

at 9000 rpm

Torque

+0.8 Nm

at 5000 rpm

Weight

-1.5 kg

This is a newly designed titanium muffler with an imprinted finish for additional strength and durability. A weight saving of 35% (1.5 kg) over the standard stock system, a deep sound, throttle response, and aesthetics are all aspects the engineers focused on in the development process. It is constructed with a high-grade titanium muffler outer sleeve and end cap and high-grade stainless-steel link pipe, muffler inner structure, and heat shield. A power increase of 0.6 kW (0.8 hp) at 9,000 rpm and a torque rise of 0.8 Nm at 5,000 rpm have been recorded when compared with a standard stock exhaust and tested on the Akrapovič dyno. A newly designed carbon-fibre heat shield is included within the product for additional protection for the rider´s gear. Plug-and-play installation means no remapping is necessary. It meets EC/ECE type-approval certificate - Euro5+.

This product is not compatible with original Kawasaki hard cases.

EXPERIENCE THE SOUND

VIEW THE DATA

DOWNLOAD DOCUMENTS

Slip-On Line (Titanium) for Kawasaki KLE 500 2026

EXPERIENCE THE SOUND

Immerse yourself in the sound of the Kawasaki KLE 500 exhaust systems.

Stock exhaust

Slip-On

VIEW THE DATA

	Unit	Akrapovič	Max gain
Max. power	kW	32.9 / 9000 rpm	+ 0.6 / 9000 rpm
	HP (m)	44.7 / 9000 rpm	+ 0.8 / 9000 rpm
	HP (i)	44.1 / 9000 rpm	+ 0.8 / 9000 rpm
Max. torque	Nm	41.4 / 6000 rpm	+ 0.8 / 5000 rpm
	lb-ft	30.5 / 6000 rpm	+ 0.6 / 5000 rpm
Weight	kg	2.8	- 1.5
	lb	6.2	- 3.3
	%		- 35.3
Inst. time	min	30

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

Performance graph / PDF (1,5Mb)

Installation instructions - EN / PDF (1,5Mb)

Installation instructions - DE, IT, FR, ES, PT, SI / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

AUS Approval / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

RACING IS IN AKRAPOVIČ DNA

MOTORCYCLE RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.