S-Y9R17-HAPT

Racing Line (Titanium) for

ECE

FIND A RESELLER IN YOUR COUNTRY

Power

+2.2 kW

at 10000 rpm

Torque

+2.6 Nm

at 9500 rpm

This brand-new complete exhaust system for the Yamaha R9 follows the look of the Akrapovič exhaust systems for the Yamaha R6, R7, and R1, with a design similar to the Akrapovič exhausts used in the World Supersport Championship.

A high-grade lightweight titanium muffler outer sleeve and end cap is combined with a stainless-steel link pipe, headers, and pre-muffler.

Developed to fit the motorcycle’s lines, a pre-muffler is positioned under the body and hidden by the lower fairings, and the muffler exits on the right side for a racing appearance. A catalytic converter is incorporated within the system to meet EC/ECE type approval (Euro 5+). It is supplied with an aluminium muffler bracket, and it delivers a deep and sporty sound.

Akrapovič engineers focused on throttle response during the development process and performance gains in the mid and high rev range. There are power and torque increases of 2.2 kW (3.0 hp) at 10,000 rpm and 2.6 Nm at 9,500 rpm, respectively, when tested on the Akrapovič dyno and compared to a Yamaha R9 equipped with a standard stock exhaust system. The plug-and-play installation means no remapping is required.

VIEW THE DATA

DOWNLOAD DOCUMENTS

Racing Line (Titanium) for null null null

VIEW THE DATA

	Unit	Akrapovič	Max gain
Max. power	kW	86.3 / 10000 rpm	+ 2.2 / 10000 rpm
	HP (m)	117.4 / 10000 rpm	+ 3 / 10000 rpm
	HP (i)	115.8 / 10000 rpm	+ 3 / 10000 rpm
Max. torque	Nm	92.5 / 8500 rpm	+ 2.6 / 9500 rpm
	lb-ft	68.2 / 8500 rpm	+ 1.9 / 9500 rpm
Volume	dB	93.3 / 5000 rpm	-2.2
Inst. time	min	60

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

Installation instructions - EN / PDF (1,5Mb)

Performance graph / PDF (1,5Mb)

Installation instructions - DE, IT, FR, ES, PT, SI / PDF (1,5Mb)

AUS Approval / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

RACING IS IN AKRAPOVIČ DNA

MOTORCYCLE RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.