S-IT125SO1-HRTBL

Slip-On Line (Titanium) for

ECE

FIND A RESELLER IN YOUR COUNTRY

Power

+0.7 kW

at 10200 rpm

Torque

+0.7 Nm

at 10200 rpm

Weight

-1.8 kg

Beautifully designed fully EC/ECE type-approved exhaust with a titanium muffler outer sleeve that is painted black and finished with an engraved Akrapovič logo. A stainless-steel link pipe and a handmade carbon-fibre end cap complete the construction to provide a sporty look in keeping with the futuristic lines of this “urban superbike”. Impeccable throttle response and a 35.6% (1.8 kg) weight savings over the stock system add to the performance of the exhaust. It delivers a power gain of + 0.7 kW (1.0 hp) at 10,200 rpm and a torque increase of +0.7 Nm at 10,200 rpm when measured on the Akrapovič dyno against a Dragster 200cc with a standard stock exhaust system. This is an exhaust that performs as good as it looks and sounds. It is easy to install, and there is no need for any remapping. An optional carbon-fibre heatshield is also available to add the finishing touch.

The catalytic converter is included in the product and the EC/ECE type-approval is valid only when the catalytic converter is installed.

EXPERIENCE THE SOUND

VIEW THE DATA

DOWNLOAD DOCUMENTS

Slip-On Line (Titanium) for null null null

EXPERIENCE THE SOUND

Immerse yourself in the sound of the null null exhaust systems.

Stock exhaust

Slip-On EC-ECE

VIEW THE DATA

	Unit	Akrapovič	Max gain
Max. power	kW	11.2 / 8460 rpm	+ 0.7 / 10200 rpm
	HP (m)	15.2 / 8460 rpm	+ 1 / 10200 rpm
	HP (i)	15 / 8460 rpm	+ 1 / 10200 rpm
Max. torque	Nm	14.1 / 6350 rpm	+ 0.7 / 10200 rpm
	lb-ft	10.4 / 6350 rpm	+ 0.5 / 10200 rpm
Weight	kg	3.26	- 1.8
	lb	7.2	- 4
	%		- 35.6
Inst. time	min	20

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

AUS Approval / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

Installation instructions - EN / PDF (1,5Mb)

Installation instructions - DE, IT, FR, ES, PT, SI / PDF (1,5Mb)

Performance graph / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

RACING IS IN AKRAPOVIČ DNA

MOTORCYCLE RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.