ME-MIN/TI/1H

Evolution Line (SS) JCW for

MINI JCW (R56) / JCW Cabrio (R57) 2014

FIND A RESELLER IN YOUR COUNTRY

Power

+1.3 kW

at 5220 rpm

Torque

+3.5 Nm

at 3030 rpm

Weight

-2.3 kg

The team behind the MINI is widely acknowledged as having done a great job bringing this iconic car up to date. The Evolution system made of high-quality stainless steel adds even more to the performance and fun to be had. This system consists of an optimized link pipe with a resonator and rear muffler. It improves performance, adds power and torque, and improves the responsiveness of the four-cylinder engine, especially in the rpm mid-range. The system has a sporty and aggressive tone, without any unwanted droning, that’s in keeping with the character of the car it’s designed for. Complete the look with a set of two exquisite 95 mm tailpipes in titanium or carbon fibre. Optional down pipe with sports catalytic converter for even greater power. EC type-approval is valid for engine type N18B16A and N14B16A.

OTHER PRODUCTS

VIEW THE DATA

DOWNLOAD DOCUMENTS

Evolution Line (SS) JCW for MINI JCW (R56) / JCW Cabrio (R57) 2014

OTHER PRODUCTS FOR MINI JCW (R56) / JCW CABRIO (R57)

Mandatory

MINI JCW (R56) / JCW Cabrio (R57) 2014

Tail pipe set (Carbon)

TP-MINR56/57-CA

Optional

MINI JCW (R56) / JCW Cabrio (R57) 2014

Downpipe (SS)

DP-MINR56/57

VIEW THE DATA

	Unit	Akrapovič	Max gain
Max. power	kW	157.3 / 5620 rpm	+ 1.3 / 5220 rpm
	HP (m)	213.9 / 5620 rpm	+ 1.8 / 5220 rpm
	HP (i)	210.9 / 5620 rpm	+ 1.7 / 5220 rpm
Max. torque	Nm	295 / 2900 rpm	+ 3.5 / 3030 rpm
	lb-ft	217.6 / 2900 rpm	+ 2.6 / 3030 rpm
Weight	kg	12.8	- 2.3
	lb	28.2	- 5.1
	%		- 15.2

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

Performance graph / PDF (1,5Mb)

Installation instructions - EN / PDF (1,5Mb)

EC Type-Approval Certificate / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

EVOLUTION LINE

Evolution Line exhaust systems are usually based on the Slip-On Line system, with additional link pipes. The Evolution Line helps deliver even more power and torque, unique resonant sound as well as weight reductions. These exhaust systems are available with a range of exquisite tailpipes in either carbon fibre or titanium. Evolution performance exhaust systems usually include mufflers, link pipes and resonators that run from the stock down pipes back. These link pipes can feature larger-than-stock-diameter tubing and cast titanium flanges. Selected versions have EC/ECE type approval.

EVOLUTION LINE

RACING IS IN AKRAPOVIČ DNA

CAR RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.