This product is constructed from high-grade lightweight titanium and increases the performance potential of the Slip-On Line (Titanium) exhaust system. This optional part comes with an X-connection, in which the gases from both sides of the engine mix for an enhanced sporty sound. The connection is cast at the in-house titanium foundry. Installation removes the set of catalytic converters. This product is lighter than the standard stock part, as shown in the data below. The Evolution Link Pipe Set (Titanium) delivers an enhanced sporty sound from the Slip-On Line (Titanium). Remapping is recommended for the configuration.

When combined with the Slip-On Line (Titanium), the Evolution Link Pipe Set (Titanium) installed on the Porsche Panamera Turbo S E-Hybrid produced an increase in power of 4.6 kW (6.3 hp) at 3150 rpm and a torque gain of 14.1 Nm at 3150 rpm when tested on the Akrapovič dyno against the equivalent car fitted with a sport stock exhaust system. In developing the Evolution Link Pipe Set (Titanium), the engineers' goal was to increase the tuning potential, which resulted in 78.6% lower back pressure.

This product was developed for use on closed-course competition circuits only, and with the installation of the Evolution Link Pipe Set (Titanium) the ECE type approval for the Slip-On Line (Titanium) is no longer valid.

An appropriate fitting kit is also mandatory when combining the Slip-On Line (Titanium) with the optional Evolution Link Pipe Set (Titanium).

THIS PRODUCT DOES NOT MEET THE EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE