S-TY/T/1H
Slip-On Line (Titanium) for
Power
+2.2 kW
at 2400 rpm
Torque
+7.4 Nm
at 2400 rpm
Weight
-6.1 kg
This ECE type-approved system is constructed entirely from high-grade titanium and features an exhaust valve with a housing cast in the in-house foundry. The single muffler arrangement has a unique set of titanium tailpipes, utilising a design not previously seen on an aftermarket exhaust. Fully adapted to the lines of the car, the outer side of the tailpipe has been coated for increased durability, while the inner surface has a bluish-purple natural titanium colour achieved by annealing, plus a stylish and sporty imprint design to give the system a very special and exclusive finish. Through the use of lightweight materials, the system will reduce overall vehicle weight, optimising power and torque through the entire rev range. Different sound modes offer a pleasant experience in comfort mode – without any intrusive drone – and, when the driving gets more dynamic and enthusiastic, the exhaust produces a vibrant and deep roar from the six-cylinder engine, which the Supra is well known for, and adds an exciting and exhilarating sensation as the revs rise.
Optional tuning opportunities exist through the addition of the stainless-steel Evolution Link Pipe set, although fitting the Link Pipe will negate the ECE type approval.
Fitment and ECE type-approval are valid for engine type B58B30C.
ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.
For installing the slip-on system, the stock exhaust system has to be cut. Please read the instructions carefully before the start of the installation.
| Unit | Akrapovič | Max gain | |
|---|---|---|---|
| Max. power | kW | 244.4 / 5300 rpm | + 2.2 / 2400 rpm |
| HP (m) | 332.3 / 5300 rpm | + 3 / 2400 rpm | |
| HP (i) | 327.8 / 5300 rpm | + 3 / 2400 rpm | |
| Max. torque | Nm | 489.4 / 3350 rpm | + 7.4 / 2400 rpm |
| lb-ft | 361 / 3350 rpm | + 5.5 / 2400 rpm | |
| Weight | kg | 10.63 | - 6.1 |
| lb | 23.4 | - 13.4 | |
| % | - 36.3 | ||
| Inst. time | min | 240 |
Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..
Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.
Akrapovič’s attention to details, materials, design, technology and optimal use is obvious with the Slip-Ons. With or without EC/ECE type-approval, they are available in Akrapovič proprietary titanium and stainless steel that is fully tested by the company. These state-of-the art Slip-Ons that are a perfect fit for your vehicle help deliver improved power and torque, unique resonant Akrapovič sound as well as weight reductions.
From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.
Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.
Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.
Back
SELECT MOTORCYCLE BRAND
