S-PO/TI/9H

Evolution Line (Titanium) for

ABARTH ALFA ROMEO AUDI BENTLEY BMW CHEVROLET CUPRA FERRARI FORD LAMBORGHINI MCLAREN MERCEDES-AMG MINI MITSUBISHI NISSAN PORSCHE RENAULT TOYOTA VOLKSWAGEN

ECE

FIND A RESELLER IN YOUR COUNTRY

Weight

-12.5 kg

This stunning system is made completely from high-grade titanium. It includes parts cast in the company’s in-house foundry, featuring an active X connection and an additional pair of exhaust valves behind the rear mufflers, designed to provide optimal control of the exhaust sound for the best aural enjoyment. The system has been perfectly tuned to deliver the very best sound experience in all modes – enormous effort was invested to give it a sporty, deep higher-frequency V8 sound with an unmistakable Akrapovič character, while keeping it smooth and eliminating any drone for maximum everyday comfort. By using the optional Akrapovič Sound Kit, the driver can choose between a loud racy sound or a quieter note for long-distance driving, regardless of the mode chosen for the vehicle. The look of the Evolution system can also be further enhanced by adding four round titanium or carbon-fibre tailpipes.

An increase in performance and torque through a broad rpm range and a significant weight savings of 40% makes this a very serious performance upgrade. With optimized gas flow and reduced back pressure, it allows limitless tuning options.

Because it is ECE type approved with no need to remap the ECU or add any other parts, it is just a simple plug-and-play installation. The exquisite Akrapovič Evolution Line (Titanium) exhaust system adds performance and style, along with an amazing soundtrack.

With the use of the optional Akrapovič Sound Kit, the ECE type approval is no longer valid.

For vehicles with the base (non sport) Porsche exhaust system, which is then replaced by the Akrapovič Evolution Line system, the Middle Valve Actuator Kit (P-HF1170) is a mandatory upgrade.

Fitment notice: This system does fit on vehicles equipped with Otto particulate filter (OPF), but the ECE type-approval certificate is not valid. This product will not fit on Executive models.

VIEW THE DATA

DOWNLOAD DOCUMENTS

Evolution Line (Titanium) for null null null

VIEW THE DATA

	Unit	Akrapovič	Max gain
Weight	kg	18.1	- 12.5
	lb	39.9	- 27.5
	%		- 40.8
Inst. time	min	135

DOWNLOAD DOCUMENTS

Schematic new version / PDF (1,5Mb)

ECE Type-Approval Certificate / PDF (1,5Mb)

Installation instructions - EN / PDF (1,5Mb)

AKRAPOVIČ PRODUCTS AND REGULATIONS

Akrapovič's product line includes products regulated by national and international emission regulations. Akrapovič makes every effort to provide accurate information on compliance of our products with various regulations and identify if they are for competition-use only or for general street/highway use in the regulated area. However, unless an explicit compliance label is indicated for a specific product, Akrapovič does not make any statement of compliance. It is the user's responsibility to choose an appropriate product for the intended use. As regulations change over time, please check the key on the website to verify the compliance with the current regulations..

Please make sure the product is installed in line with installation instructions and used in accordance with all local regulations, as the compliance label may otherwise not be valid.

LEARN MORE ABOUT REGULATIONS

EPA

Means that such product meets the EPA noise standard as set forth by the United States Code of Federal Regulations, Title 40, Chapter I, Part 205, Subpart E (80 dBA).

Means that such product is compliant with the applicable requirements of the European Union Directive EC 97/24 or the European Commission Delegated Regulation (EU) No. 134/2014 supplementing Regulation No. 168/2013 (EU) of the European Parliament and of the Council as indicated in the attached EC type approval document in the package and available on the product website.

Means that such product meets the USAD Forest service Standard for spark arresters FS5100-1.

ECE

For motorcycle exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R92 on Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles.

For car exhaust systems: Means that such product is compliant with the requirements of the United Nations Regulation ECE-R59 on Uniform provisions concerning the approval of replacement silencing systems.

ABE

Means that such product is compliant with the requirements of the German Type Approval, paragraph 20 of the StVZO.

EVOLUTION LINE

Evolution Line exhaust systems are usually based on the Slip-On Line system, with additional link pipes. The Evolution Line helps deliver even more power and torque, unique resonant sound as well as weight reductions. These exhaust systems are available with a range of exquisite tailpipes in either carbon fibre or titanium. Evolution performance exhaust systems usually include mufflers, link pipes and resonators that run from the stock down pipes back. These link pipes can feature larger-than-stock-diameter tubing and cast titanium flanges. Selected versions have EC/ECE type approval.

EVOLUTION LINE

RACING IS IN AKRAPOVIČ DNA

CAR RACING

RACING PARTNERS

WHAT IS UNIQUE ABOUT AKRAPOVIČ?

From the R&D department with sound engineering—and through the laboratories that manage and measure the materials and into the in-house titanium foundry and then to production, before evaluation and completion—the manufacture of an Akrapovič exhaust is an internal journey with many facets that are all completed at the company’s state-of-the-art facilities.

HIGH-QUALITY MATERIALS

Using only the highest standard of materials in the production of every Akrapovič exhaust, our materials are thoroughly inspected upon arrival and assessed in the metallurgical laboratory. Though more than 35 years of experience working with titanium, stainless steel, carbon fibre, aluminium alloys, and more recently ceramics matrix composites, Akrapovič sources only the best materials to produce its high-quality exhaust systems.

ABOUT AKRAPOVIČ

Akrapovič is a manufacturer of premium exhaust systems for motorcycles and performance cars. It is renowned around the globe as an innovative company that uses advanced technology and high-quality materials in exhaust system design and manufacture. Akrapovič exhaust systems excel in improved performance, an unmistakable sound, innovative design, lightweight construction, craftsmanship, and durability. There is no mistaking an Akrapovič.